1. The air compressor should be parked in a place away from steam, gasification and dust. The water inlet pipe should be equipped with a filter device.
After the air compressor is in place, the block should be wedged symmetrically. 2. Always keep the outside of the storage tank clean. Do not weld or heat treat near air tanks. The gas storage tank undergoes a hydraulic test once a year, and the test pressure is 1.5 times the working pressure.
Pneumatic instruments and safety valves should be inspected once a year.
3. Operators should undergo special training and must have a comprehensive understanding of the structure, performance and function of the air compressor and auxiliary equipment, and be familiar with the operation and maintenance procedures.
4. Operators should wear work clothes, and lesbians should tie their braids into work caps.
It is strictly forbidden to work after drinking, not to engage in things unrelated to the operation, not to leave the job without authorization, and not to decide to change the job of non-native-speaking operators without authorization.
5. Before starting the air compressor, check and prepare according to regulations, and pay attention to open all valves of the air storage tank. After the diesel engine is started, it is necessary to carry out heating operation at low speed, medium speed and rated speed, and pay attention to whether the readings of all instruments are normal before it can run with load. The air compressor should be gradually loaded and started, and it can run at full load only after all components are normal.