In order to improve the production equipment and install air springs, the following air springs are selected:
1. The production site needs to be evaluated to determine whether there is any modification. First, ensure enough space, including the location width and installation height. In addition, the greater the bearing capacity, the greater the space reserved. Suitable places include: no need to contact with open flame, avoid contact with sharp tools, etc. If there are extreme working conditions, such as high temperature, low temperature, pH, we need to contact a professional for professional advice. This is very special for people of professional level. From what I know, at least I know Goma. In particular, the professional level of the customer service staff is very good, but also more patient.
2. From the point of view of the load required by the air spring, the carrying capacity of the air spring in China is very strong. In goma, for example, the goma air spring has a maximum single bearing capacity of 15 tons, and there may be differences between different brands. When considering the bearing capacity, the distribution should be as uniform as possible. Take a 15-ton load, for example. If space conditions are met, it is better to choose a 53 ton air spring rather than a 15 ton air spring. The uniform distribution of bearing capacity can prevent biased load.